Spreaders & Matth Poles

Spreaders & Matth Poles Day Rate
Maxi Matthpole 99" - 187" $12.00

Matthews Matthpoles are stronger and more durable than any similar product. Unique "expanding casting" provides the pressure for holding the Matthpole in place. Used primarily in studios for mounting seamless paper and backdrops with the use of Super Mafer Clamps and Swivel U-Hooks; the Matthpole has also been used in a horizontal position behind the President of the United States to support small lighting fixtures, in campaign venues for many candidates, and probably in many places we don't even know about. Manufactured in three overlapping sizes, Matthpoles can be used in openings as small as 30" to 187" which is almost 15 feet without the need for extensions.

Less Information.

Medium Matthpole 53" - 97" $10.00
Small Matthpole 30" - 53" $9.00

Matthews Matthpoles are stronger and more durable than any similar product. Unique "expanding casting" provides the pressure for holding the Matthpole in place. Used primarily in studios for mounting seamless paper and backdrops with the use of Super Mafer Clamps and Swivel U-Hooks; the Matthpole has also been used in a horizontal position behind the President of the United States to support small lighting fixtures, in campaign venues for many candidates, and probably in many places we don't even know about. Manufactured in three overlapping sizes, Matthpoles can be used in openings as small as 30" to 178" which is almost 15 feet without the need for extensions.

Less Information.

2X6 Wall Spreader set (3) Piece $5.50

Wall Spreaders are used in both vertical and horizontal positions. They are placed at each end of a 2x6 piece of lumber. The Wall Spreader is a three piece system, one is simply a receptacle for the lumber with a padded flat plate welded to it to protect the wall or ceiling and the other is a receptacle for lumber and a telescoping piece to insure a tight fit. CAUTION: Because lumber sags over long lengths and when weight is added, the entire structure may become loose and could come down. To avoid damage to the wall or ceiling, plates should only be used directly in line with studs.

Less Information.

2X4 Wall Spreader set (3) Piece $4.50

Wall Spreaders are used in both vertical and horizontal positions. They are placed at each end of a 2x4 piece of lumber. The Wall Spreader is a three piece system, one is simply a receptacle for the lumber with a padded flat plate welded to it to protect the wall or ceiling and the other is a receptacle for lumber and a telescoping piece to insure a tight fit. CAUTION: Because lumber sags over long lengths and when weight is added, the entire structure may become loose and could come down. To avoid damage to the wall or ceiling, plates should only be used directly in line with studs.

Less Information.

2x4 Slider w/ Baby Pin & Junior Receiver $3.00
1.25" SpeedRail Wall Spreader 3 Piece $5.00