The Mirrored Reflectors are also 42" x 42" and are similar to the Standard Reflectors with the exception of the surface, which is an actual glass mirror mounted with special brackets for easy changing. These Reflectors are most commonly used for reflecting HMI Par or Xenon light sources. There is also a Xeno mirrored surface available for higher temperature light sources. On both reflectors the yokes have a brake in the pivot and are stand mounted via a 1-1/8" pin.

Matthews Mirror Reflectors are manufactured with tempered, glass mirrors- NOT Plastic reflectors- for higher reflectivity and true color transmission.

Less Information.

Matthews offers several different types of Reflectors. The Standard Reflector measures 42" x 42" and is made of honeycomb material sandwiched between two sheets of aircraft aluminum, which is then set into an aluminum frame. The frame is then mounted into a yoke which has a 1-1/8" pin to fit a Combo Stand and a pivoting positive locking braking system. The Standard Reflector has a shiny silver paper on the "hard" side and silver leaf squares on the "soft side." It is available in silver or gold.

Less Information.

Matthews offers several different types of Reflectors. The Standard Reflector measures 42" x 42" and is made of honeycomb material sandwiched between two sheets of aircraft aluminum, which is then set into an aluminum frame. The frame is then mounted into a yoke which has a 1-1/8" pin to fit a Combo Stand and a pivoting positive locking braking system. The Standard Reflector has a shiny silver paper on the "hard" side and silver leaf squares on the "soft side." It is available in silver or gold.

Less Information.

Less Information.

Less Information.