Ronford-Baker Specifications

Ronford-Baker Fluid Head 7 (F7) Specifications

Ronford-Baker Fluid 7 Variable Camera Head - (Also known as the Ronford F7 Head.) The Ronford F7 head is designed for use with film or video/EFP cameras. Its two sealed fluid units allow control to be varied through seven stages, from a cushioned free movement to the heaviest control required, by the use of three simple on/off levers. Both pan and tilt actions are continuous through 360°, depending on the length of the lens and camera.

Ronford F7 Head
Photo Courtesy Ronford-Baker

Specifications

  • Operation temperature range: +150°F to -40°F (+60°F to -40°C)
  • Weight: 17lb 14oz (8kg) standard
  • Wide Platform 5 3/4" (15cm)
  • Custom 2 1/2" Riser available
  • Fluid cushioned free head
  • Sealed fluid system gives seven degrees of control in both pan and tilt
  • Smooth accurate braking on pan and tilt
  • Recessed circular spirit levels
  • 360° scale on pan
  • 150mm base (Mitchell or other fittings can be supplied on request)
  • Double taper roller bearings throughout
  • Camera screw and platform adjust for vertical and horizontal balance
  • Second pan bar available

Ronford-Baker Heavy Duty Tripod 10001 Specifications

Ronford-Baker Heavy Duty Tripod
Photo Courtesy Ronford-Baker

Head fittings
Mitchell top plate supplied as standard.

Technical Specifications
Materials and Finish
Castings are LM25 anodized, stove enameled black texture. Tubes are 1” dia x 16swg HE30TF alloy, polished and anodized, with nylon wipers and nylon locking pads. Stainless Steel spikes to feet, with rubber covers. Locking levers are anodized and stove enameled black texture. All steel parts are hardened where necessary, and chrome plated.

Height
With legs spread at 1’6” (45.7cm): closed 3ft’ (91.4cm), fully extended 5’6” (167.6cm).

Weight
22lb (10kg).

Spreader
An infinitely adjustable spreader with a strong elastic clip-down device, which is secured in seconds. Made from high tensile anodized aluminium with large diameter locking hand-wheels to adjust length of spread; steel parts hardened and heavily chromium plated.
Dimensions (center to foot) minimum 1’5” (43cm), maximum 2’1” (64cm).
Weight 4lb 7oz (2kg).


Ronford-Baker Medium Duty Tripod 10007 Specifications

Ronford-Baker Medium Duty Tripod
Photo Courtesy Ronford-Baker

Head fittings
150mm bowl supplied as standard.

Technical Specifications
Materials and Finish
Castings are LM25 anodized, stove enameled black texture.
Tubes are ¾” dia x 16swg HE30TF alloy, polished and anodized, with nylon wipers and nylon locking pads. Stainless Steel spikes to feet, with rubber covers.
Locking levers are anodized and stove enameled black texture. All steel parts are hardened where necessary, and chrome plated.

Height
With legs spread at 1’6” (45.7cm): closed 3ft’ (91.4cm), fully extended 5’6” (167.6cm).

Weight
14lb (6.5kg).

Spreader
An infinitely adjustable spreader, integral tripod, with a strong elastic clip-down device, which is secured in seconds. Made from high tensile anodized aluminium with large diameter locking hand-wheels to adjust length of spread; steel parts hardened and heavily chromium plated.
Dimensions (center to foot) minimum 1’5” (43cm), maximum 2’1” (64cm).
Weight 4lb 7oz (2kg).



This page hand coded for your enjoyment on 12/4/14